Class A Cdl Pre Trip Inspection Checklist

There are many parts to learn but the test is not as difficult as it seems. Look for puddles on the ground that would indicate a leak.

Daily Truck Inspection Checklist Template in 2020

You conduct a methodical inspection without missing required components.

Class a cdl pre trip inspection checklist. With the engine running, apply the foot brake and hold for five seconds. All commercial vehicles must display a current inspection sticker to receive a road test. This diagram was taken directly from the.

Not bbc, no holes, all rivets in place. Clearance lights proper color, securely mounted, not cracked or dirty, no moisture inside lense. Check for leaks, condition of hoses.

You must name and point to or touch each item, and fully explain what you are inspecting (you. Dot tape is securely mounted, not dirty, covers at least 50% of the side. When visible or accessible, you must point at or touch the component you are inspecting.

Tell the tester how you know that the part you are inspecting is in good, safe working condition. You must name and point to or touch each item, and fully explain what you are. Supervisor and service garage should be notified immediately of any safety concerns.

Repairs can be addressed before they become costly, major repairs. Apply parking brake only and shift into a lower gear. An effective inspection exposes safety concerns and potential maintenance issues.

You may have to walk around the vehicle and point to or touch each item and explain to the examiner Frame is not bbc, securely mounted. It covers the air brakes, suspension parts, steering components, wheels and rims, fuel tanks, batteries, lights, and more.

Look for dripping fluids on the underside of the engine and transmission. Item to be checked and explain how you check that item. It is meant to be a thorough check of the semi truck, trailer and load, to ensure that everything correctly, prior to the truck driver, departing on a trip.

If your vehicle has the component but it is not visible or accessible, describe its location. There are a ton of picture resources out there that will help you memorize the test. Every commercial license applicant must pass a cdl driving test and every cdl driving test consists of at least three initial parts.

1 engine compartment + 1 axle 3 ls. All of the major systems must be inspected. Identify all defects or you may not receive credit.

The pre trip inspection is an integral part of every road trip for a trucker. Header board not bbc, all hardware present. You must be able to correctly tell and demonstrate to the tester what you are checking each part for and how to check it.

Gently pull against the brake by releasing the clutch, and it should hold the vehicle.

Pin by Jay Mac on Guides Cdl, Bus engine, Driving school